CONEXA Home
INFORMATIONEN
CONEXA fittings are manufactured in accordance with the following standards:
| Fittings | International standard | DIN |
| Fittings with Cutting Ring | ISO 8434-1 | DIN 2353 |
| Cutting rings | DIN 3861 | |
| Fittings with 24° cone end | DIN 3942-45 | |
| Weld fittings | DIN 3865 |
CONEXA fittings comply with the technical delivery regulations in accordance with DIN 3859-1
| Male Stud Connector | Port | |||||
| Standard for fitting | Thread | Seal | International standard | DIN | International standard | DIN |
| ISO 8434-1 | BSP-thread, parallel | Sealing edge | ISO 1179-4 | DIN 3852-2 type B | ISO 1179-1 | DIN 3852-2 type X |
| Retaining ring | ISO 1179-2 | DIN 3852-11 type E | ISO 1179-1 | DIN 3852-11 Type X | ||
| Metric thread | Sealing edge | ISO 9974-3 | DIN 3852-1 type B | ISO 9974-1 | DIN 3852-1 type X | |
| Retaining ring | ISO 9974-2 | DIN 3852-11 type E | ISO 9974-1 | DIN 3852-11 Type X | ||
| O-Ring | ISO 6149-2/3 | ISO 6149-1 | ||||
| UN/UNF | ISO 11926-2/3 | ISO 11926-1 | ||||
| NPT | ANSI / ASME B1.20.1-1983 | ANSI / ASME B1.20.1-1983 | ||||
| BSP- thread, tapered | DIN 3852-2 type C | DIN 3852-2 type Z | ||||
| metric thread, tapered | DIN 3852-1 type C | DIN 3852-1 type Z | ||||
CONEXA fittings comply with the applicable standards. Technical changes reserved. Technical changes reserved.
CONEXA Catalogs
The new online product catalogs from CONEXA are available in Englisch and German.
Contact
CONEXA GmbH
Präzisionsarmaturen
Vorm Berge 1
D - 34346 Hann. Münden
+49 (0)5541 98770
+49 (0)5541 987777
CONEXA Hann.Münden
LINKS
CONEXA Impressions
CONEXA GmbH
Präzisions-Armaturen
Vorm Berge 1
D - 34346 Hann. Münden
+49 (0)5541 98770
CONEXA By Car
