INFORMATIONEN
Male Stud Connector | Male Stud Connector | Male Stud Connector |
Type A | Type B | Type E |
Seal with sealing ring (DIN 7603) | Seal with sealing edge | Seal with sealing ring (elastomeric seal) |
Metric thread: | Metric thread: | Metric thread: |
DIN 3852-1 | ISO 9974-3 / DIN 3852-1 | ISO 9974-2 / DIN 3852-11 |
BSP-thread: | BSP-thread: | BSP-thread: |
DIN 3852-2 | ISO 1179-4 / DIN 3852-2 | ISO 1179-2 / DIN 3852-11 |
![]() | ![]() | ![]() |
Port | ![]() |
Type X | |
Metric thread: | |
ISO 9974-1 / DIN 3852-1 | |
BSP-thread: | |
ISO 1179-1 / DIN 3852-2 |
C | M 8x1 | M 10x1 | M 12x1.5 | M 14x1.5 | M 16x1.5 | M 18x1.5 | M 20x1.5 | M 22x1.5 | M 26x1.5 | M 27x2 | M 33x2 | M 42x2 | M 48x2 |
d3 -0.4 | 12.0 | 14.0 | 17.0 | 19.0 | 21.0 | 23.0 | 25.0 | 27.0 | 31.0 | 32.0 | 39.0 | 49.0 | 55.0 |
d5 -0.2 | - | 13.9 | 16.9 | 18.9 | 21.9 | 23.9 | 25.9 | 26.9 | 31.9 | 31.9 | 39.9 | 49.9 | 54.9 |
d4 min | 13 | 15.0 | 18.0 | 20.0 | 23.0 | 25.0 | 27.0 | 28.0 | 33.0 | 33.0 | 41.0 | 51.0 | 56.0 |
d4 +0.4 min | 17.0 | 20.0 | 20.0 | 21.5 | 24.5 | 27.5 | 30.0 | 31.5 | 36.5 | 37.5 | 45.0 | 55.0 | 62.5 |
b1 max | 8.0 | 8.0 | 12.0 | 12.0 | 12.0 | 12.0 | 14.0 | 14.0 | 16.0 | 16.0 | 18.0 | 20.0 | 22.0 |
a1 | 1.0 | 1.0 | 1.5 | 1.5 | 1.5 | 2.0 | 2.0 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
C | G 1/8 | G 1/4 | G 3/8 | G 1/2 | G 3/4 | G1 | G1 1/4 | G1 1/2 |
d3 -0.4 | 14.0 | 18.0 | 22.0 | 26.0 | 32.0 | 39.0 | 49.0 | 55.0 |
d5 -0.2 | 13.9 | 18.9 | 21.9 | 26.9 | 31.9 | 39.9 | 49.9 | 54.9 |
d4 min. | 15.0 | 20.0 | 23.0 | 28.0 | 33.0 | 41.0 | 51.0 | 56.0 |
d4 +0.4 | 17.0 | 21.5 | 25.5 | 30.0 | 37.0 | 47.0 | 58.0 | 63.5 |
b1 min. | 8.0 | 12.0 | 12.0 | 14.0 | 16.0 | 18.0 | 20.0 | 22.0 |
a1 max. | 1.0 | 1.5 | 2.0 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
CONEXA Hann.Münden
LINKS
CONEXA Impressions
CONEXA GmbH
Präzisions-Armaturen
Vorm Berge 1
D - 34346 Hann. Münden
+49 (0)5541 98770
CONEXA By Car